Preparation of:
1. Finite element-based models (with ETABS/SAFE or equivalent)
2. Construction design report with all loads calculations, combinations explanations, model results;
3. Construction drawings (including rebar);
For:
1. Foundations (piles, isolated footings, stone columns, rigid inclusion, etc.) as per the soil surveys and liquefaction risks
2. Reinforced concrete structures
Of the following structures:
1. Wastewater Pumping Station
- Wastewater pumping station and pre-treatment building above
- Technical and generator set building
- Water hammer and transformer
- Transformer slab
- Pavement
2 Manholes along the pipes
- Manholes (15 typical sizes/types)
Interceptor boxes (15 typical sizes/types)
